Related topics

Keep Getting "Unknown Device Detected"
I've checked the Asus web site for any drivers for this motherboard but to no avail. Can anyone tell me what this device is and where I can download the drivers for it...? All help would be appreciated PS I tried also running Win98SE on the same motherboard with the same uknown PCI device displayed under Device

strlen("literal string") -> (sizeof("literal string")-1)
"F. Golightly" <no.m...@ok.tuvm> I have five of the below 'Unknown Device" conflicts. (Registry Key: 0001, 0003, 0005, 0006, and 0008). When I boot I get a request for unknow device drivers *but* there are none so I just cancel five times. The system seems to work well but I'd like to not worry about this Uknown

Uknown Device after motherboard bios update
It compiled fine, the disks work now (my SATA drives also show up as /dev/sd* finally) but now the sky2 device disappeared. lspci can still see it, it's a Marvell "Uknown Device 4364, rev 12" sitting off the PCI-E bus. This device was not listed in the 2.6.17 sky2 driver and is not included in the 2.6.18 version

NO SOUND
But, I have several problems in the Control Panel|System|Device Manager that I didn't have before: A yellow ! for a "standard dual PCI IDE controller." This is interesting because I don't use IDE, only SCSI. Under Uknown devices, I have an uknown: PCI card [even though all my PCI cards are properly identified as

Please help with my hard drive perf!
There is one more Uknown device and I can not install it (it tells me uknown device-on PCI standard ISA bridge) I downloaded some drivers and succesided to install IBM network card but when I plug network cord there are two led diods lit (green and orange). Is that normall? When I want to ping my clients trough IBM

PCI unknown device errors
Thanks... potential temperature or equivalent potential temperature hard to explain when you have no knowledge of upper air soundings (Actually), these terms are as valid whether considering the atmosphere or an expansion/compression chamber or other device. 2 definitions of equivalent potential temperature exist

USB problem?
marlen pellersels mjpe...@pionet.net alt windows98 Keep getting uknown device that needs a driver , but can't tell what that device is. Any way to find out?

More P4B266 problems. Please help!
Rich rich.hoff...@lmco.com microsoft public win95 Generally, set a printer driver to file and when you print you will get a device dependent PRN file. I added a port and named it PRN. but this gets allocated an uknown local port. I need to assign it a printer port. I have tried ammending the registry settings

sound card unrecognised
... be attached to my pc.i bought a usb to ps/2 adapter so as to attach the ps/2 cable but my pc does not recognise it (unknown usb device),windows can't find drivers and i can't use the keyboard. when i attach only the second cable(usb)both keyboard and mouse are working but the mouse a very erratic behaviour.

CiscoView & E1 Card
Can any one tell me how I can get command register info, and other programming data from an uknown device like this? Does any one know how to trace/sniff a paralell port. I *can* get the thing to communicate under dos (tcp/ip and lanman). Also, can someone tell me if I can upgrade the 63mb Conner drive on this

Progress <was> Re: Need a WINDOWS 98 Expert --- > (ALLAN)
In article <4Kj88.101480$E4.3880...@e3500-atl2.usenetserver.com>, uknown <unkn...@msn.com> wrote: well, i got an ipaq 3635. i updated to 2002 OS. lately i have noticed after a peroid of time with device out of the cradle or in it. with the power off. it will turn itself on. it just started doing this. and i put no

Problems with Unkown devices
I have five of the below 'Unknown Device" conflicts. (Registry Key: 0001, 0003, 0005, 0006, and 0008). When I boot I get a request for unknow device drivers *but* there are none so I just cancel five times. The system seems to work well but I'd like to not worry about this Uknown Device seeking drivers!

DFI P5BV3+ and USB Not Working?
I finally did get them recognized by windows, but now they are labeled an "unknown device" even though I've reinstalled all the correct drivers for them. When I want to copy cds with Roxio it tells me that it can't find them. There's got to be a way you can tell the computer that they are CD Rom Devices.

Cannot open root device "hde4" or uknown-block(0,0)
Dlink network card, nvidia mx400 video card and soundblaster live sound card installed and accounted for in Device manager (no other cards installed, onboard sound disabled). Also loaded USB2 drivers from mainboard cd. Still I have one uknown device with a question mark which says it is using IRQ5.

136kHz
Every now and again when i boot up i get a message telling me Windows has found a new device and is loading it in, then i notice the modem PC light is not on and in Device Manager there is an uknown device,If i delete the unknown device and unplug/plug the modem everything is Ok?

Asus TULS2-C and Other PCI Device
I've installed WinXP Pro and have updated most of the drivers including integrated audio, video card, network devices, etc. Problem: Whenever I boot up the machine, during the POST it tells me that my CPU type is Uknown and is 606Mhz. It also says that my CPU is an Uknown type in my device manager.

PCI communication device found!
Get into windows and there;s no hard drive controllers listed in Device Manager. Drive C is now running in DOS compatibility mode. I reboot, rerun hardware detect, even try adding the hard drive controller back by hand, nothing gets it back! On Next reboot, windows just says "Uknown hardware found etc" and "PCI

Fdisk/config problems with Asus SC875
Windows 95 sees an uknown (and unexistant) pci card and wants to install drivers for it. I have told Windows not to install a driver for this PCI card. Windows seems to run ok, but in the device listing I see that unknow device listing. The Only PCI card I have in this system is a STB velocity video card and the

Win2k Reboot Problem
I've installed a HP ScanJet 4C, but I'm now getting a problem with an uknown device during startup, no matter how many times I delete this device it still comes back on the next boot-up. The weird thing is that the machine is picking up the HP SCSI card and there are no other devices installed in the PC.

unknown device in device manager
When I boot I get a request for unknow device drivers *but* there are none so I just cancel five times. The system seems to work well but I'd like to not worry about this Uknown Device seeking drivers! I also have an entry F: as a Removeable Disk, that is unexplained. I noticed when I put my USB CF card reader in